Start with the vehicle label
The driver’s door pillar tyre label is your reference for the recommended cold pressures. Tyre sidewalls also carry pressure information, but the maximum shown there is not the same as the car’s recommended operating pressure. Different tyre and vehicle configurations can require different settings.
Check before the drive
Tesla’s guidance calls for checking when tyres are cold. Pressure rises as tyres warm during driving. Do not release air from warm tyres just to make the reading match the recommended cold figure. Recheck under the specified conditions and follow the instructions for your vehicle.
Respond to warnings with a check
If the TPMS warning appears, inspect the tyre and pressure rather than treating the warning as something to dismiss. Repeated loss of pressure needs attention. A puncture, valve issue or other damage cannot be diagnosed from the dashboard number alone. Send a photo and describe how quickly the pressure is dropping.
Build useful checks into your routine
Before a longer journey between emirates, give the tyres a visual check as well as a pressure check. Look for obvious damage and changes in tread wear. If you see a bulge, exposed cords or damage from running flat, arrange an inspection rather than continuing the journey on that tyre.
Make an enquiry with the right information
Share the model, tyre size, the warning or displayed pressure, and your location. If the car is parked in a basement or restricted property, include access details too. We can discuss a pressure check, tyre inspection or replacement enquiry based on the situation. A photograph supports the enquiry, but an inspection establishes the repair decision.
